Enshu JE-60 
Horizontal Machining Center  

The JE60 horizontal machining center features "Time Optimization" whereby key subsystems have been computer modeled in 1/10 sec. increments at the design stage and optimized within the total system for maximum performance.

The results of this systems engineering approach to slashing both spindle times and "non-cut" times are tool-to-tool toolchanges of 1 sec., rotary table indexes of 90¯ in 1.5 sec., pallet shuttles of 6 sec., and spindle accelerations and braking to and from 8,000 rpm within .81 sec.

The JE60 horizontal was designed to provide many of the advantages of a CAT 50 Taper machine while maintaining the economies of a CAT 40 Taper machine such as smaller footprint, inexpensive tooling, and exceptional ergonomics. The powerful 41 hp integral drive, chilled-oil-cooled spindle features ceramic bearings and air curtain nose protection. The huge 23.6" workcube is traversed in the three primary axes up to 1,181 ipm, positioning at 0.00008" with repeatabilities of 0.00004". The 15.7" x 15.7" pallets each support up to 880 lbs of workpieces and fixturing. The JE60 can be specified with a 40, 60, or 120-tool servo-driven, random access tool magazine, all of which are serviced by a servo-driven, dual-gripper arm toolchanger.

Control is via the Yasnac i80 CNC featuring custom macros and a full keypad. The CNC supports rigid tapping to 4,000 rpm, pacing the JE60 in a class with many dedicated drill/tap machines.
 

Email: info@buckleyowens.com