|
Model C
800U
Universal Vertical Machining Center
Click
Here to See Model C800U
Click Here to See
Machine Specifications
The C 800 Series
vertical machining centers developed by Hermle, does not only cover the traditional tool
manufacture and mold making with three configurations (vertical, production, and universal), but represents with its design a
new type of machine that combines the universality of the well-known universal machine
with the productive characteristics of a vertical machining center.
Design
Principle
- Modified gantry design;
- Tool travel in 3 axes,
component independent dynamics, ideal condition for rapid movement and feeds up to 35m/min
(1378" per minute).
- Mineral casting for the
machine base;
- Guideways and drives
outside the working area;
- Compact structure, thus
minimum space requirement;
- Machine can be
transported completely assembled;
- No foundation required
for the installation (3-point supported);
- High rigidity;
- Good static and dynamic
properties;
- High positioning and
long term accuracy;
- Short positioning times
with acceleration of 5 meters per second squared.
Mineral Casting
Design
- Mineral casting has
excellent vibration dampening properties, low thermal conductivity and is not hygroscopic;
- Casting of highest
accuracy;
- Optimum surface finish;
- Ecological manufacturing
and disposal of mineral casting.
Features
- Traverse in X-Y-Z
direction X-Y-Z 31.5 - 23.6 - 19.7 inches;
- Full power of 20 HP
already available at 1,100 rpm (at 40% duty cycle);
- Speed range from 20 to
8,000 rpm for a variety of applications;
- Rapid traverse of
35m/min. (1378" per minute) for all axes to reduce non-productive time;
- Tool changer with 30
magazine tool positions and chip to chip time of 5 seconds;
- Ergonomical control
panel, movable from the operating position to the tool loading position;
- Large sliding doors at
the front, opening to the right or left;
- Swarf container at the
left side of the machine can be emptied easily;
- Heidenhain TNC 430 Control Technology.
Options
- An NC-indexing head as
4th axis can be mounted directly on the rigid table (option).
- Increased spindle speed
20 - 15000 rpm;
- High Speed milling
spindle 3000 - 36000 rpm;
- Tool breakage monitoring
with laser sensor;
- Magazine extension with
87 tool pockets;
- Closed top;
- Blowing attachment;
- 3-D Touch probe;
- Coolant supply through
the spindle center;
- Oil mist extractor;
- Ethernet interface;
- Graphite machining
package;
- Zero-point clamping
systems;
- HSC (High Speed Cutting)
version;
- Swarf conveyor;
- Rotary distributor for
clamping fixtures
|
