Enshu EV-650C 
Vertical Machining Center  

The EV650C vertical spindle machining center has been designed for the most difficult requirements encountered in machining pre-hardened tool steels and high nickel refractory aerospace alloys.

This extremely rigid, large table, high-horsepower machine features massive heavily ribbed castings, over-sized box ways on all axes (dual sets on the Y-axis), high- speed, high accuracy way oil film management, and ballscrews almost two-inches in diameter, double pretensioned, and slip coupling protected.

The dual-range, 6,000 rpm, 20 hp integrally wound spindle motor drives the oil-chilled, air-curtain protected, ceramic bearing supported spindle with its #50 Taper spindle nose. These construction approaches result in 0.00012" full stroke positioning accuracy, and 0.00004: repeatabilities.

The EV650C features a 78.7" x 25.6" table capable of supporting up to 3,360 lbs. Rapid travels are 787 ipm (X and Y), and 591 ipm (Z), describing a work envelope of 63" (X), 25.6" (Y), and 26" (Z). Additionally, the machine is capable of rigid tapping at speeds to 3,000 rpm. Tools are stored in a 20 or 30-tool random-access, bi-directional magazine, with toolchanges at 2.5 seconds, tool-to-tool. A built-in auger-type chip conveyor is also standard.
 

Email: info@buckleyowens.com