|
Advanced
Technology for the
Manufacturing of Precision Blanks  Excalibur,
from LMC, Inc., contains technology that increases speed and
accuracy for the manufacturing of cut-off parts from bar, coil or
tubing. Excalibur gives you years of money-saving
advantages which puts you on the forefront of world competition today
and tomorrow.
- Excalibur
Maximizes Profit. Cut
offs produced from coil or bar stock, solid or tubing, from any
shape or size.
 High
Speed Production
Excalibur is the most cost efficient method for high speed,
quality production of blanks from steel and other materials.- Outstanding
Consistency
Length tolerances are kept consistently within one thousand of
an inch, allowing some manufacturers to eliminate post-production
inspection and secondary machining.
- Elimination
of Cracks and Burrs
Excalibur virtually eliminates pulldown and distortion with
minimal physical contact on the fracture zone. Each cut is
consistent to the previous cut.
-
No Work
Hardening
Excalibur's
use of adiabatic softening completely eliminates work hardening.
-
Minimal
Waste
Excalibur causes no fumes and no waste, resulting in a clean
working environment.
-
Superior
Material Utilization
There is no loss of material in the process of separation.
-
Operator
Friendly and Safe
The machine access is automatically monitored for safety.
Blanks exit at room temperature.
-
Fully
Automatic
One operator can work up to half a dozen presses. It not
only measures, feeds and cuts, but automatically sorts out end
pieces.
-
Long Tool
Life/Low Maintenance
The dies will last for millions of parts before they are
completely worn out. Periodic sharpening is easily
accomplished with a conventional surface grinder.
- Energy
Efficient
Excalibur uses less than 10% of the energy
consumption of conventional machines.
Contact us at
Buckley Owens today to learn how Excalibur Adibatic Process
Manufacturing Technology for improved manufacturing of precision
blanks in your plant.
|
