General
Maximum part length: 10"
Work swing: 7"
Supportable weight: 44 lbs
Width x Depth x Height: 58" x 76" x 74"
Weight: 4400 lbs
Height of part from floor: 41"

Workhead
Motor: 0.6 hp
Work spindle speed range: 1-1500 rpm
Work center taper: #2 Morse
Through-hole diameter: .590"

Tailstock
Work center taper: #2 Morse
Quill travel distance: 1.2"
Quill advance/retraction: Air-operated

Wheelhead
Motor: 5 hp
Speed : 2400 rpm
Wheelsize, maximum: 14" x 2" x 5"
Wheelsize, throw away: 10"
Rapid traverse rate: 320 ipm
Programmable fee rate: .00001 to 200 ipm
Travel, maximum: 6.7"
Angle of wheelhead: 0° or 30°
Surface speed: 8800 sfpm
Bearings: Hydrodynamic

Table
Rapid traverse rate: 640 ipm
Programmable feed rate: .00001 to 200 ipm
Work table travel: 14"

Axis Slides2
AC digital servo-drives: 0.6 hp
Command resolution: 0.000010"
Position feedback resolution: 0.000001"
Way construction: Vee and flat with pressurized lubrication

Lubrication
Workhead & ballscrew bearings: Grease packed
Wheel spindle bearings: Recirculating hydraulic oil
Ways & ballscrews: Recirculating lube oil
Lubrication tank: 1 gal
Hydraulic oil tank: 4 gal
Coolant tank (optional): 26 gal